Anionic polyacrylamide for chemical production use
|FOB Price:||US $1,632 / Ton|
|Min. Order:||10 Tons|
|Min. Order||FOB Price|
|10 Tons||US $1,632/ Ton|
|Payment Terms:||L/C, T/T|
- Model NO.: CAS: 9003-05-8
- packing: 25kg/bag
- sample: 25kg/bag
- Mf: (C3h5no)N
- exprorting: global
- Trademark: xxxxxxx
- Specification: industrial grade
- HS Code: 39069090
- CAS: 9003-05-8
- form: Granulars
- Einecs No.: 207-173-7
- grade: industrial grade
- use: Water Treatment Agent
- Transport Package: 25kgs/Bag, 25*40/Pallet
- Origin: China
Product name:Anionic Polyacrylamide
Use:Mining Waste Water Treatment
Mining Flocculant:for Steel,Coal,Copper etc.Mining Use
Advantage:Low Dosage & Fast Settling Speed
Top Water:High Clarity of Top Water
Certificate:ISO 9001 & ISO 14001
Specification:ISO 9001 & ISO 14001
Main technical data
Appearance: White Granular
Effective content ≥88%
Ionic type: anion
Molecular weight: 3-18 million
Suggested solution concentration: 0.1-0.3%
Dissolution time: ≤1 hours
Anionic Polyacrylamide Product Description
Low hydrolysis degree, almost similar to nonionic type.In mining solid-liquid separation,performs well such as good flocculation,fast settling speed and top clarity of water.Has good capturing ability & top water clarity for low density solid & fine particles tailings.
Anionic Polyacrylamide Application
Mainly for waste water treatment and mining solid-liquid separation that has with fine particles & low density solids and requires good top clarity of water.
Anionic Polyacrylamide Application method
1) Dissolve PAM to 0.1% water solution.
2) Dissolving time, 1hr max.
3) Adjust the dosage to ensure good flocculation & separation.
4) If necessary, take method of multiple floc. Adding points and batch dosing
Anionic Polyacrylamide Packing & storage
-In 25kgs PE inner bag with PP outer bag.
-Recommended storage periods: 2 years from receipt of goods
-Stock solution 24hours
-Storage of polymer should be in a cool, dry place.
Anionic Polyacrylamide specification
|Appearance||White or off-white powder|
|Solid content, %||90min.|
|Water insoluble, %||0.05% max.|
1. This product is used for city life sewage and industrial organic wastewater treatment,elector positivity in acid or salt medium,extremely effective for flocculation and sedimentation of sewage and clarification with negative charge.
2. Used for sludge dewatering. Choose corresponding grades of this product according to the nature of the sludge, by gravity sludge dewatering before entering the sludge dewatering machine. When using the product it can produce big floccules,non-stick filter cloth,no spreading at filter press, less dosage,high dewatering efficiency,mud cake moisture content less than 80%.
3. Used as water-treatment flocculants for water plant,less dosage,good effect and low cost.Effect is better
when use with inorganic flocculent compound.
1. Make up 0.1-0.3% aqueous solution when using,neutral without salt water is suitable
2. Scatter this product into the stirred water to ensure good dispersion and swelling in water (do not add water before adding product),for not forming "fish eye",dosing pipe blockage,operation failure.Keep stirring
speed 100-300 RPM;
3. Produce on demand,no more than one day after preparation.Use stainless steel,plastic,glass,fiberglass.
in the preparation,transfer,storage products;
4. If use with inorganic flocculent compound,first add the inorganic coagulants,when appears alum flowers (general interval time30 to 60 seconds),then add the products,cannot reverse the order,do not add
5. Transfer dissolved flocculent by screw pump, diaphragm pump.
Matters needing attention
1. Operators should wear protective equipment,if contact with the skin, wash with water.
2. If there is a small amount of leakage,clean with plenty of water,If a large number of leaks,sweep first then clean with plenty of water,emergency first puts on a lot of sand to prevent slipping injuries.
3,Sealed in a cool dry place to prevent damp
4, Storage life:12months